Air Drying Gun
Single Dry Air Gun
 

Price: €78.00

Devilbiss DAGR Airbrush
INC 3 x FREE PAINTS

Sprays most automotive paints and lacquers.

Hairline detail to high paint-flow shading and gradual fades.

Lightweight, well balanced with smooth double action trigger.

Crown cap standard for fine lines and needle protection.

Copper, nickel and chrome plated body.

Pre-set handle for precise control of paint flow.

Removable 9 mls (1/3rd oz) gravity cup.

Solvent proof fluid passages, Teflon® needle packing.

Precision made and hand tested in the U.S.A.

Technical Specification
Operating Pressure - 1.3 – 3.5 bar (20 -50 psi)
Max inlet pressure - 12 bar (175 psi)
Fluid tip - 0.35mm
Cup Capacity - 9 mls (1/3 fl/oz)
Airbrush plating - Nickel, copper, chrome
Needle Packing - Teflon®(solvent proof)
Hose: Inside diameter - 3.2 mm (1/8”)
Air Hose connection - 1⁄4” NPS (M)
Universal fluid threaded connector - 3/8”
 

Price: €147.00

Using exactly the same ergonomically designed, drop forged aluminium body the GTi Pro has also been acclaimed for applying clear coats to the absolute optimum levels of gloss retention, light refraction and definition of image.

Trans-Tech atomisation quality gives an equalled combination of speed and fineness of atomisation to retain gloss with economy of material use due to the high transfer efficiency.

Choose from three Trans-Tech air caps and three fluid tip sizes to get the set up combination that best suits your application methods and material types.

When developing the GTI Pro ease of maintenance and cleaning was uppermost on the agenda and this is in evidence in the trigger removal stud, the cartridge air valve, the self-adjust needle packing and the sealed off fluid tip threads.

As with the BASE model the gun can be factory supplied with the digital “pod” pressure gauge at eye level or of course the standard DGi Pro gauge/adjuster can be fitted at the air inlet.

Price: €425.00

This new model is a budget priced spray gun with conventional atomisation targeted at small jobbing car refinish painters where low output portable compressors are frequently in use.

* General Purpose Gravity Feed conventional spray gun

* Set up for the application of all conventional automotive refinish and industrial paints

* Lightweight and strong aluminium construction

* Smooth fluid flow and pattern shape controls

* A 1hp/5cfm compressor is all you need to spray.

Features
Suitable for most automotive refinish general single layer materials
lightweight but strong, plated, cast aluminium spray gun body construction
Comfort ergonomical handle
Smooth trigger action for ease of operator control when feathering or bleeding
Easy to adjust air inlet pressure, spray pattern shape (full fan to round) and fluid controls
The air cap only consumes 136 L/min (4.8 cfm) so a small portable 1hp / 5 cfm air compressor is sufficient to operate the spraygun
SLG-610 sprayguns are supplied as ready to use "Refinisher Kits" complete with a 550ml cup, filter, cleaning brush & universal spanner
Specification

The SLG-610 has a standard 1/4" air inlet connection thread and has a recommended working pressure of 2.5 bar (35psi). The max inlet pressure is 4 bar.

Comes as a 1.3mm Setup.
 

Price: €72.00

Price: €19.00

Price: €235.00